The Plasma Elite II ®

The Plasma Elite ® Fibroblast Plasma Pen is 100% made in Britain and designed according to the electrical Safety-standards IEC60601-1, ES60601-1. The Plasma Elite II ® Plasma Pen, follows the ISO standards in manufacturing to make this device safe to use. Our Plasma Pen has ground-breaking technologies to ensure consistent delivery of a stable Plasma Arc by using a stabilised precision source to deliver the Arc at exactly the right frequency which guarantees precision spotting and sublimation. The frequency can be described as low frequency.
Our handset has the stability of a Direct Current controlled unit, that means our pen doesn’t need earthing pads which a lot of the DC units normally require. We have Dual feedback loops within the control circuits to ensure a stabilised and consistent application whatever the charge of the battery. It doesn’t matter whether you use high or low frequencies you need to create the right plasma arc and distance between the skin and the arc tip for great results.
The most important element of any plasma machine is the training of how and what to do with the plasma spark to use it properly, safely and effectively.
The probes we are using are one of the finest on the market place with a .44 size tip enabling very fine spotting. Each probe is individually sterilized and disposed of after each treatment. The probes are from Asia.
In the news
Chat and share photos privately at your HIPPA portal | by clicking here!
Request More Information
Plasma Pen Training

Plasma Elite® Plasma Pen Training
What Our Plasma Pen Training Includes:
- Plasma technology, what is it and how it works on the skin
- In depth review of the Plasma Elite ® plasma pen device including accessories, how to charge and operate, and cleaning and taking care of your plasma pen
- Indications, contraindications, adverse events, and warnings and precautions of plasma treatments
- Plume debris and protection control following Health and Safety guidelines
- Aseptic technique and treatment set-up for safe treating
- Patient consultation, including managing expectations, and patient preparation
- Treatment techniques for each treatment area
- Post-treatment care instructions, including information regarding aftercare kit and home
- Treatment results
- The technology behind Plasma
- What Plasma can & can’t treat
- Safe working parameters
- Regulations & guidelines for your business
- Hygiene, personal safety & client safety
- Pre treatment checks
- Adverse incidents & how to deal with them
- Full & comprehensive aftercare processes
- Airborne viruses & protection control
- Health & safety & risk assessment
- A fully comprehensive 6 page Consultation
- Skin types, what is & isn’t suitable for Plasma
- Managing client expectations
- Working in a sterile environment
- Skin: it’s structure, fibroblasts, healing processes
- Plasma Pen Machine set up
- Probe sterility & why it’s important
- Related anatomy & physiology
- Contraindictions in full
- Caring for your client during treatment
- Questions & answers
- Frequency of treatments
If you are unable to attend the Plasma Elite ® training course on the date booked you must let us know a minimum of 14 days before the course date or your payment will not be refunded.
What our clients say
OUR AFFILIATIONS
Meet your Expert
Sherry Hale CEO, BSIT, LC, CMLT, CPCP, LSO
Sherry Hale is the CEO and founder of the SHALE Group, as well as being the motivating force behind numerous expansions. With over 30 combined years in the beauty and Cosmetic micro-pigmentation industry, Hale’s name has become synonymous with dedication, passion, and tenacity.
Performing over 10,000 procedures and 10 years of constant dedication, she takes great pride in her work helping others and sees an average of 35 clients a week in addition to running her empire.
Sherry Hale is the leader in cosmetic tattoo artistry in Amherst, Buffalo and Western New York; ready to provide you with 5-star customer service at Custom Beaute.

Phoenix office
Detailed Process of Removal
Customer makes a video of her experience!
FAQs
The plasma elite hand-piece produces a tiny plasma flash by ionising the gases in the air to form plasma which creates a small electrical arc from the probe to the skin in a micro-millimeter sized point.
The plasma produces an energy, which vaporizes in the immediate vicinity of the skin causing the tissue to contract.
Plasma is formed by the ionisation of atmospheric gases to stimulate contraction and shorten the tissue fibres reducing the skin surface.
The tip of the probe is able to precisely direct the arc to the skin in small dot thereby reducing the heat spreading across the skin. Some other plasma units on the market place emit too much heat. The plasma elite specifically has a finer probe to avoid doing this.
A series of tiny brown spots are strategically placed to attain the desired result for the excess skin. The skin around the spot tightens pulling the cells closer together.
The plasma directly treats the target and prevents the spread of heat through the non ablative approach of sublimation.
Through a finer tip and a unique application technique plasma pen avoids over heating, avoiding swelling normally associated with other plasma equipment.
Plasma has amazing results for non-surgical blepharoplasty, deep smoker lines, excess skin around the eyes and neck.
The application of Plasma induces controlled trauma to the area leading to increased collagen production, and a shrinking and tightening of the skin.
This process reduces excess skin and in particular can tighten the eyelid/under eye area, scar tissue, lines and wrinkles around the mouth on the neck and anywhere on the skin causing concern.
A series of tiny brown spots are strategically placed to attain the desired result for the excess skin. The skin around the spot tightens pulling the cells closer together.
It’s non-invasive,safe and gives immediate results.
The only post-treatment preparation is a 48-hour patch test to check there is no allergic reaction to the numbing cream. You can offer a patch test on the skin of the plasma treatment to determine swelling and healing time if the customer would like this opportunity, but we’d suggest to make a small charge for this.
Your client in advance of the treatment cannot of used:
- Retinol or AHA acids for 4 weeks prior
- Had botox for 6 weeks prior
- Must be checked for contraindications
- Must not have a tan or be going or returning from the sun
It all depends on each individual and the area required treating. We recommend always a full and comprehensive consultation (plasma elite provide the consultation forms) and normally recommend 2/3 sessions.
It completely depends on the client and the area treated and the natural rate of recovery. It is normal for sensitive areas such as eyelids to become swollen and we would recommend not applying makeup, which to some people this may mean downtime.
Some areas weep slightly after treatment; this is simply plasma and is quite natural. As the spots begin to heal they naturally turn into crusts and flake off.
Aftercare is an essential part of any treatment. After a Plasma treatment the body goes through the same process when healing as a typical wound healing routine. It’s covered in 3 main steps:
- Inflammation – this is the body’s natural response to trauma
- Proliferation – this is where the wound starts to rebuild new, healthy, granular tissue
- Maturation – also know as remodelling, this is the final stage after the wound has healed. Maturation starts when the wound looks healed so it’s important to keep your aftercare routine going.
To find out more about our specially formulated aftercare products, take a look at our shop.
Our practitioners must prove they are qualified level three, Nurse or medical practitioner, Semi Permanent operator with at least 2 years experience . Our classes are small 2/3 max and we always provide several models to work on.
8 hours online theory and one day practical training.
- Disposable Probe
- Aesthetic Numbing Cream (purchased by the salon direct)
- Sterowipes
- Trolley Pack
- Aftercare Kit
Contact us to find out more:
sherry@shale.ink
Yes make contact via the model application form and a member of our team will be in touch with you.
Contact us and one of our members of the sale team will be in touch with you.